Product Description :
Specification:Needs 5/8 inch or 16mm diameter opening to install.
Fits dispenser wall up to 11/16 inch or 17mm thick.
Material:304 Stainless steel.
Thread Pitch: 1.
25MM/0.
05 inch.
Package includes:1 x stainless steel spigot;2 x stainless steel washer;2 x silicon gasket;1 x stainless steel nut;1 x Anti-Clogging Cap;Installation Steps:1.
Remove the Anti-Clogging Cap from the spigot;2.
Put a metal washer on the spigot;3.
Put a silicon gasket next to the metal washer;4.
Put the half assembled spigot through the hole of the dispenser;5.
Take another silicon gasket and put on the spigot from the inside of your jug/vessel;6.
Add another metal wash behind the gasket;7.
Put the nut and tighten it slowly;8.
Put the Anti-Clogging Cap on the end and tighten it.
(Please avoid over tighten if your dispenser is glass)Kindly Remind:1.
Make sure the Mounting Hole Size before purchasing.
2.
Before installation, wash the stainless steel spigot in soapy water and rinse suggested .
3.
Do not over-tighten, it could crack the dispenser made of fragile material like glass or ceramic.
4.
If used for sugary drink, we suggest that remove the spigot from the dispenser and clean thoroughly.
Product Details :
Detail | Value |
---|---|
Mounting Type | Wall Mount |
Finish Type | Polished |
Material | Stainless Steel |
Color | Brass |
Included Components | Stainless steel(spigot, washer, nut, Anti-Clogging Cap), silicon gasket |
Handle Type | Lever |
Installation Type | Single Hole |
Item Dimensions LxWxH | 4.29 x 2.72 x 1.54 inches |
Handle Material | Stainless Steel |
Product Dimensions | 4.29 x 2.72 x 1.54 inches |
Item Weight | 6.5 ounces |
Item model number | LLC025-N |
Date First Available | September 6, 2017 |
Reviews
There are no reviews yet.