FTR12B 2.4GHz 12CH Receiver Dual Antennas for PL18 NB4 NB4 Lite AFHDS3 Transmitters RC Airplane Helicopter Vehicle

Product Description :

NOTE:This is the genuine FTR12B receiver,welcome to buy, Support genuine products, we will always escort .
Product Designation: FTr12B Compatible transmitters: all AFHDS 3 transmitters and RF Modules (PL18, NB4, NB4 Lite, etc.
) Model Type: fixed wing, glider, helicopter, delta wing, engineering vehicle, etc PWM Channels: 12 RF: 2.
4GHz 2.
4G Protocol: AFHDS 3 Antenna: Dual Antennas Input Power: 3.
5-9V Data Output: PWM/PPM/i.
BUS out/S.
BUS Temperature Range: -10℃ to +60℃ Humidity Limit: 20%-95% Online Update: Yes Dimensions: 39*32*15mm Weight: 15g Certification: CE，FCC ID: N4ZFTR12B00 Binding: 1.
Press and hold thereceiver BIND button [5] while powering on the receiver ,release the BIND button after receiver is powered on or powering on the receiver first, press and hold the BIND button 3 seconds , the LED [7] on the receiver will flash rapidly; 2.
Put the transmitter into bind mode; 3.
The binding process is complete when the LED on the receiver stops flashing and is on continuously.
If a transmitter that has had its radio frequency (RF Standard) set to “AFHDS3 1 way” (please refer to your transmitter user manual) enters bind mode, the receiver LED will instead flash slowly.
Exit bind mode on the transmitter and if the receiver LED stops flashing and is on continuously, the binding process is complete.
4.
Check to make sure the transmitter and receiver functions are working correctly, repeat steps 1 to 3 (binding process) if any problems arise.

Product Details :