Product Description :
Safety Protocols: Read through the manuals of all power devices and aircraft and ensure the power configuration is rational before using this unit, as improper power configuration will overload the motor and damage the unit.
When installing this unit, relevant operations like soldering, connecting will be needed, so please ensure all wires and connections are well insulated before connecting the unit to related devices, as short circuit will damage the unit.
When soldering relevant wires of the unit, please use a soldering iron with sufficient power to do the job, as poor connection may cause your aircraft to lose control or other unpredictable issues like damage to the device.
Always keep your aircraft away from unsafe elements like obstacles, crowd, high-voltage power lines.
Please fly your aircraft in the working environment as regulated in this manual.
Although there are some protections, improper use may still cause permanent damage to the product.
Always disconnect and remove batteries after use, as the ESC may drive the motor to rotate and cause unpredictable danger if it`s still connected to the battery.
Long-time contact will cause the battery to completely discharge and result in damage to the battery or/and the ESC.
High-performance 32-bit microprocessor with the running frequency of up to 48MHz for an excellent performance.
BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
All codes use damped light mode.
Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
The code supports features to prevent sync loss.
There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.
The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.
7-83.
3us) and Multishot (5-25us).
Important information
Legal Disclaimer
HOBBYWING official manufacturer warranty – Note: Hong Kong, Chinese stores are not HOBBYWING authorized store in North America. Deems items non-warranty If typographical errors appear on or within our website, we sincerely apologize and appreciate all help in identifying such errors so as to correct them as quickly as possible. Nonetheless, HOBBYWING North America cannot be held responsible for typographical errors and assumes no responsibility for said errors. A high power system for the RC model can be very dangerous, so please read this manual carefully. HOBBYWING North America has no control over the correct use, installation, application, or maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use of the product. Any claims arising from the operating, failure or malfunctioning, etc. will be denied. We assume no liability for personal injury, consequential damages resulting from our product, or our workmanship. As far as is legally permitted, the obligation to compensation is limited to the invoice amount of the affected product. For more information please contact our North America Online store HOBBYWINGDirect.com
Product Details :
Detail | Value |
---|---|
Product Dimensions | 4 x 4 x 0.5 inches |
Item Weight | 3.36 ounces |
Reviews
There are no reviews yet.