Scapa 4450 Adhesive Transfer Tape is an unsupported (it does not have a backing and is only adhesive) acrylic adhesive transfer film tape on a siliconized paper liner. It is the same kind of tape as Scapa T002 ATG tape; however, it is not reverse wound or on a 1" core like an ATG tape so does not require an ATG dispenser to apply it (please note that it will not fit or work in an ATG dispenser for these reasons). It has an acid-neutral (pH 7) acrylic adhesive. Scapa 4450 is used for self-adhesive labels and nameplates; mounting of photographs and posters; and splicing tape for film and paper webs. It is also used for graphic arts applications, picture framing, exhibit, and POP displays and product assembly. Other applications include mounting promotional items and posters and also mounting picture frame mat boards and dust covers. It has good long-term aging properties, good temperature resistance, and glass fibers in adhesive provide easier application and clean break of adhesive. Made in Canada.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 12mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information
– Core: 3 inch diameter
– Backing/Carrier: N/A (Unsupported)
– Adhesive: acrylic
– Release Liner: siliconized paper
– Thickness: 1.6 mils (carrier, adhesive)
– Adhesion: 25 ounces per inch (to stainless steel test panel)
– Application Temperature: 65F (minimum)
– Service/Operating Temperature: 32F to 360F
- Scapa 4450 Adhesive Transfer Tape is an unsupported (it does not have a backing and is only adhesive) acrylic adhesive transfer film tape on a siliconized paper liner.
- It is the same kind of tape as Scapa T002 ATG tape; however, it is not reverse wound or on a 1" core like an ATG tape so does not require an ATG dispenser to apply it (please note that it will not fit or work in an ATG dispenser for these reasons). It has an acid-neutral (pH 7) acrylic adhesive.
- Scapa 4450 is used for self-adhesive labels and nameplates; mounting of photographs and posters; and splicing tape for film and paper webs. It is also used for graphic arts applications, picture framing, exhibit, and POP displays and product assembly.
- Other applications include mounting promotional items and posters and also mounting picture frame mat boards and dust covers. It has good long-term aging properties, good temperature resistance, and glass fibers in adhesive provide easier application and clean break of adhesive
- Carrier/Backing: N/A (Unsupported). Adhesive: acrylic. Release Liner: siliconized paper. Thickness: 1.6 mils (carrier, adhesive). Adhesion: 25 ounces per inch (to stainless steel test panel). Service/Operating Temperature: 32F to 360F. Application Temperature: 65F (minimum). Core: 3-inch diameter.
Reviews
There are no reviews yet.