Culligan OR-34A 2 pack Replacement O-Rings for Culligan and Ace Filters by Captain O-Ring

Before replacing the o-ring, refer to the bottom of the sticker on of your Culligan filter housing. Two different o-ring sizes are enclosed: Sticker plates coded "Rev C" or higher, for models HF-150A, HF-360A, and Ace 45025 housings should use the smaller o-ring enclosed. Sticker plates coded "Rev A" or "Rev B" for models HF-150A and ALL other models HF-160, HF-360, HF-365, Ace 45025, Ace 46764, Ace 49560 should use the larger o-ring enclosed. Note: The o-ring labels seen in the picture are just for representation. The o-rings can be identified by their size difference in the package using the instructions above to determine the correct size for your filter. The o-ring installation process is incredibly easy. To install the o-ring, remove the old o-ring and clean out the groove with a clean cloth. Lubricate the new o-ring with clean/new silicone grease. Press the o-ring into groove with two fingers, ensuring that it sits flat and level in the groove. What to expect: This item includes two 2 larger o-rings and two 2 smaller o-rings [4 o-rings total] in a resealable zip-top poly bag with "Captain O-Ring" branded packaging. Manufactured and warrantied against defect for one year by Captain O-Ring LLC. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC.

• Includes 4 O-Rings 2x Smaller "A" O-Ring and 2x Larger "B" O-Ring
• Fits: Culligan HF-150A, HF-160, HF-360A, and others see description below
• OR-34A should be replaced every two filter changes, or when leaking.
• Compatible with silicone lubricant and many other lubricants to ease installation.
• Manufactured and Warrantied by Captain O-Ring LLC