Top Gun 476 Marine Topping & Cover Canvas with Acrylic Impregnated 100 Percent Polyester Fabric, Burgundy

Acrylic impregnation coating is Dupont Zepel with Stain & Water Repellency. Hydrostatic Performance 8" for 10 minutes (FED-STD-191,5516): Initial 0.0 milliliters, after weathering 7.0 milliliters. Hydrostatic Pressure 3 Drops (FED-STD-191,5514): Initial 83.8 centimeters Breathability: ASTM E96, Method B: 116g/sqm. Crock (AATCC-Chromatic Transference Scale): Wet 4, Dry 4 TOP GUN ia considered a 600 Denier x 600 Denier fabric. Technically it is made up of 4 plies of 150 Denier twisted together to make each 600 Denier yarn. Marchem fabrics are tested for 500 hours in a Carbon-Arc Weatherometer without filters. This is the harshest weathering equipment & simulates a southern Florida climate. 500 hours in a Carbon-Arc without filters is more severe than 1,000 hours in either QUV or Xenon. Spray Rating (AATCC 22-1974): 90.

Features

• Marine Topping & Cover Canvas, Acrylic Impregnated 100% Polyester

Cautions:

• When total protection against color rub-off is required a protective patch should be sewn in at contact pointsespecially contact with vinyl
• To maintain a sharp appearance all that is required is to periodically clean with a mild soap & soft brush followed by a thorough rinse
• Top Gun fabrics may be cleaned with a cleaning solution of 4 oz of Clorox & 2 oz of Soap in one gallon of warm 100F water
• Do Notuse detergents
• Use a soft bristled brush to lift soil embedded in the fabric surface
• Rinse thoroughly with clear water to remove soil & soap residue
• After thorough cleaning, water repellency may be reduced
• An application of Aqua-Tite silicon water repellant is recommended after the fabric has dried thoroughly
• Use of other refinishing agents is not recommended
• Color pigments are in the acrylic resin so color can come off with application of some solvents

Uses:

• Protective Covers Outdoor Boat Tops Boat Covers

Specifications

• Color: Burgundy
• Abrasion: Exceeds 16,000 Double Rubs
• Coating: Acrylic
• Cold Crack: Cold Crack is equal to or greater than -20 degrees Celsius & -4 Fahrenheit
• Construction: 0600 Denier
• Content: 100% Polyester
• Ultraviolet: Product is Rated Ultraviolet Resistant equal to or greater than 1500 hours
• Mildew: Mildew Resistant
• Protect Finish: Water Repellent
• Tearstrength: Passes ASTM D2261 – Warp = 43 lbs & Fill = 30 lbs
• Tensilestrength: Passes ASTM D1682 – Warp = 500 lbs & Fill = 388 lbs
• Style: Solids & Plain
• Thread Count: 54 x 36 Square in.
• : The for Top Gun is a Five-year limited
• Width: 62"
• Weight: 18.94 oz per Linear Yard, 11.00 oz Per Square Yard

– SKU: JENFB4129

Acrylic impregnation coating is Dupont Zepel with Stain & Water Repellency. Hydrostatic Performance 8" for 10 minutes (FED-STD-191,5516): Initial 0.0 milliliters, after weathering 7.0 milliliters. Hydrostatic Pressure 3 Drops (FED-STD-191,5514): Initial 83.8 centimeters Breathability: ASTM E96, Method B: 116g/sqm. Crock (AATCC-Chromatic Transference Scale): Wet 4, Dry 4 TOP GUN ia considered a 600 Denier x 600 Denier fabric. Technically it is made up of 4 plies of 150 Denier twisted together to make each 600 Denier yarn. Marchem fabrics are tested for 500 hours in a Carbon-Arc Weatherometer without filters. This is the harshest weathering equipment & simulates a southern Florida climate. 500 hours in a Carbon-Arc without filters is more severe than 1,000 hours in either QUV or Xenon. Spray Rating (AATCC 22-1974): 90.

Features

• Marine Topping & Cover Canvas, Acrylic Impregnated 100% Polyester

Cautions:

• When total protection against color rub-off is required a protective patch should be sewn in at contact pointsespecially contact with vinyl
• To maintain a sharp appearance all that is required is to periodically clean with a mild soap & soft brush followed by a thorough rinse
• Top Gun fabrics may be cleaned with a cleaning solution of 4 oz of Clorox & 2 oz of Soap in one gallon of warm 100F water
• Do Notuse detergents
• Use a soft bristled brush to lift soil embedded in the fabric surface
• Rinse thoroughly with clear water to remove soil & soap residue
• After thorough cleaning, water repellency may be reduced
• An application of Aqua-Tite silicon water repellant is recommended after the fabric has dried thoroughly
• Use of – SKU: JENFB4129