3M Scotch 897 Filament Strapping Tape: 3/4 in x 60 yds. (Clear)

3M Scotch 897 Filament Tape is a medium-strength, general-purpose, clear fiberglass-reinforced tape with a synthetic rubber resin adhesive ideal for medium-duty strapping, bundling and reinforcing. Its synthetic rubber resin adhesive provides good adhesion to most surfaces, including a variety of plastics, fiberboard, carpets, natural fibers, and metals. Designed with an adhesive that provides good initial adhesion and holds well with minimum rub-down, Scotch Filament Tape 897 is a general purpose solution for a variety of bundling and reinforcing applications. The backing, filaments and adhesive combine to provide high tensile and shear strength compared to general purpose tapes. It allows for printing and illustrations to be seen through the tape. This tape holds under a wide range of application conditions with a minimum amount of tape, leading to lower cost for applications where high tensile strength is a main requirement.

Features & Benefits

• UL recognized 969 file MH26206.
• Abrasion and moisture resistant; maximizes package performance when exposed to outdoor and humid environments.
• Allows printing and illustrations to be seen through the tape; clear display of graphics, artwork, and other important messages.
• Good shear and initial adhesion (hold with minimum rubdown); good holding with minimum amount of tape under wide range application conditions.
• Good aging; boxes remain closed for long period of time.
• Less tape needed for applications where high tensile strength is a main requirement.

Uses & Applications

• Carpet bundling.
• Strapping.
• Box reinforcing and closing.
• General packaging.

Made in Canada. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 18mm x 55m. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
– Core: 3 inch diameter
– Backing/Carrier: glass yarn reinforced, polypropylene (PP) film
– Adhesive: synthetic rubber
– Thickness: 5 mils (carrier, adhesive)
– Adhesion: 50 ounces per inch (to stainless steel test panel)
– Tensile Strength: 170 pounds per inch (longitudinal)
– Elongation: 4 %

• 3M Scotch 897 Filament Tape is a medium-strength, general-purpose, clear fiberglass-reinforced tape with a synthetic rubber resin adhesive ideal for medium-duty strapping, bundling and reinforcing. Its synthetic rubber resin adhesive provides good adhesion to most surfaces, including a variety of plastics, fiberboard, carpets, natural fibers, and metals.
• Designed with an adhesive that provides good initial adhesion and holds well with minimum rub-down, Scotch Filament Tape 897 is a general purpose solution for a variety of bundling and reinforcing applications. The backing, filaments and adhesive combine to provide high tensile and shear strength compared to general purpose tapes. It allows for printing and illustrations to be seen through the tape.
• This tape holds under a wide range of application conditions with a minimum amount of tape, leading to lower cost for applications where high tensile strength is one of the main requirements. Uses and applications include carpet bundling, strapping, box reinforcing and closing, and general packaging.
• 3M Scotch 897 Filament Tape is UL recognized 969 file MH26206, abrasion and moisture resistant; maximizes package performance when exposed to outdoor and humid environments, allows printing and illustrations to be seen through the tape; and has a clear display of graphics, artwork, and other important messages, and other features.
• Carrier/Backing: glass yarn reinforced, polypropylene (PP) film. Adhesive: synthetic rubber. Thickness: 5 mils (carrier, adhesive). Adhesion: 50 ounces per inch (to stainless steel test panel). Tensile Strength: 170 pounds per inch (longitudinal). Elongation: 4%. Core: 3-inch diameter.