Perfect for making flat lightweight items magnetic. Magnet requires direct and full contact with steel for maximum hold, therefore it is best to make sure that magnet is flat. Magnet & adhesive work best when applied at above 60 degrees Fahrenheit or 15.56 degree Celsius. For best results: 1)Allow magnet to reach room temperature then cut magnet with heavy duty scissors or hobby knife. 2)Apply magnet’s dark gray side to large metal surface for several hours to flatten curl. Do not roll magnet strip in opposite direction to remove curl. 3)Clean applicable surface for adhesive with isopropyl alcohol and allow to dry. 4)Peel back liner from the adhesive and place item on adhesive. 5)Apply adhesive to surface with firm pressure 6)Allow adhesive to cure for a minimum of 24 hours or 72 hours to reach maximum bond with surface.Flexible Magnet Tape – 1/16" thick x 2" wide x 10 feet (1 roll)
Flexible Magnet Tape – 1/16′ thick x 2′ wide x 10 feet (1 roll)
$9.23
1384 in stock
SKU: PX4KPXD7F08JG7IP
Category: Thumb Tacks & Push Pins
Tags: Flexible Magnet, Flexible Magnet Tape, Magnet Tape
Dimensions | 1 × 1 × 1 in |
---|
Only logged in customers who have purchased this product may leave a review.
Related products
Thumb Tacks & Push Pins
Pen + Gear Clips and Pushpins, 232 Count, Black and White, Pins and Tacks
0 out of 5
$12.67
Thumb Tacks & Push Pins
Pen + Gear Push Pins in Clamshell, Clear Plastic Head, Steel Point, 200 per Pack
0 out of 5
$1.72
Thumb Tacks & Push Pins
Pen + Gear Push Pins in Clamshell, Clear Plastic Head, Steel Point, 100 per Pack
0 out of 5
$1.10
$1.30
Reviews
There are no reviews yet.