JVCC E-Tape Colored Electrical Tape: 2 in x 66 ft. (Grey)

JVCC E-Tape Colored Electrical Tape is a general purpose all-weather PVC film electrical tape with an aggressive rubber resin adhesive that comes in OSHA colors. It is a UL/CSA listed electrical tape with a 1.5 inch inner diameter core. JVCC E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant. E-Tape 3/4" inch wide rolls are individually cello-wrapped and labeled, and other widths are custom slit and bulked packed.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 48mm x 20m. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. The color name grey can also be spelled as gray. Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

Technical Information
– Core: 1-1/2 inch diameter
– Backing/Carrier: plasticized polyvinyl chloride (PVC) film
– Adhesive: rubber resin
– Standards Met: UL/CSA listed
– Thickness: 7 mils (carrier, adhesive)
– Adhesion: 14 ounces per inch (to stainless steel test panel)
– Tensile Strength: 17 pounds per inch (longitudinal)
– Dielectric Strength: 6000 volts
– Application Temperature: 32F to 122F
– Service/Operating Temperature: 14F to 176F
– Elongation: 250 %

• JVCC E-Tape Colored Electrical Tape is a general purpose all-weather PVC film electrical tape with an aggressive rubber resin adhesive that comes in OSHA colors. It is a UL/CSA listed electrical tape with a 1.5 inch inner diameter core. JVCC E-Tape Electrical Tape is used for cable coding, quick identification of electrical phases, circuits, feeders, and branches. Flame retardant and cold resistant. E-Tape 3/4" inch wide rolls are individually cello-wrapped and labeled.
• Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.
• Tape rolls are typically cut to standard tape industry metric-cut sizes – or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
• Adhesive: rubber resin. Carrier/Backing: plasticized polyvinyl chloride (PVC) film. Thickness: 7 mils (carrier, adhesive). Adhesion: 14 ounces per inch (to stainless steel test panel). Tensile Strength: 17 pounds per inch (longitudinal)
• Dielectric Breakdown: 6000 volts. Service/Operating Temperature: 14°F to 176°F. Application Temperature: 32°F to 122°F. Elongation: 250%. Standards Met: UL/CSA listed. Core: 1.5 inch diameter