Patco 560 Polyethylene Clean Removal Tape: 1/2 in x 36 yds. (Clear)

Patco 560 Polyethylene Clean Removal Tape is a low-density polyethylene (LDPE) film tape used for temporary surface protection, color coding, product and packaging material identification, and for general masking applications. Patco 560 is also suitable for splicing plastic films and as a surface and label overlaminate. This tape is designed for both indoor or outdoor use. Abrasion and solvent resistant, removes cleanly, and will not leave an adhesive residue are just some of the benefits of Patco 560 Polyethylene Clean Removal Tape. Patco 560 conforms well to irregular surfaces and stands up to chemical and mechanical wear. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 12mm x 108 ft. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
– Core: 3 inch diameter
– Backing/Carrier: low-density polyethylene (LDPE) film
– Adhesive: acrylic
– Thickness: 5.5 mils (carrier, adhesive) 1 mils (adhesive) 4.5 mils (carrier)
– Adhesion: 25 ounces per inch (to stainless steel test panel)
– Tensile Strength: 11 pounds per inch (longitudinal)
– Application Temperature: 50F to 120F
– Service/Operating Temperature: -40F to 190F
– Elongation: 500 %

• Patco 560 Polyethylene Clean Removal Tape is a low-density polyethylene (LDPE) film tape used for temporary surface protection, color coding, product and packaging material identification, and for general masking applications.
• Patco 560 is also suitable for splicing plastic films and as a surface and label overlaminate. This tape is designed for both indoor or outdoor use.
• Abrasion and solvent resistant, removes cleanly, and will not leave an adhesive residue are just some of the benefits of Patco 560 Polyethylene Clean Removal Tape. Patco 560 conforms well to irregular surfaces and stands up to chemical and mechanical wear.
• Patco 560 Polyethylene Clean Removal Tape features and benefits include highly conformable, abrasion and solvent resistant, clean removal, no residue, and chemical and mechanical wear resistance.
• Carrier/Backing: low-density polyethylene (LDPE) film. Adhesive: acrylic. Thickness: 5.5 mils (carrier, adhesive) 1 mil (adhesive) 4.5 mils (carrier). Adhesion: 25 ounces per inch (to stainless steel test panel). Tensile Strength: 11 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 190F. Application Temperature: 50F to 120F. Elongation: 500%. Core: 3-inch diameter.