Shurtape HP-240 Production-Grade Packaging Tape: 3 in x 110 yds. (White with Red ‘STOP – If Seal Is Broken’ printing)

Shurtape HP-240 Production-Grade Printed Message Packaging Tape is a printed stock message tape that allows for quality carton sealing, pilferage proof, and warning messages all in the same application. Same consistent strength and hold as Shurtape HP-200. Use Shurtape HP 240 for medium weight carton sealing; bundling; and repairing cartons, paper, and film bags. The full printed message includes a red STOP sign along with the text "If Seal Is Broken Or Package Damaged Check Contents Before Signing Receipt". Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 72mm x 100m. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
– Core: 3 inch diameter
– Backing/Carrier: 30 micron biaxially oriented polypropylene (BOPP) film
– Adhesive: synthetic rubber-resin
– Thickness: 1.9 mils (carrier, adhesive)
– Adhesion: 44 ounces per inch (to stainless steel test panel)
– Tensile Strength: 27 pounds per inch (longitudinal) 44 pounds per inch (transverse)
– Application Temperature: 35F to 110F
– Service/Operating Temperature: -20F to 150F
– Elongation: 150 %
– Holding Power to Fiberboard: 15,000+ minutes

• Shurtape HP-240 Production-Grade Printed Message Packaging Tape is a printed stock message tape that allows for quality carton sealing, pilferage proof, and warning messages all in the same application.
• Same consistent strength and hold as Shurtape HP-200. Use Shurtape HP 240 for medium weight carton sealing; bundling; and repairing cartons, paper, and film bags.
• The full printed message includes a red STOP sign along with the text "If Seal Is Broken Or Package Damaged Check Contents Before Signing Receipt".
• Standards Met: ASTM D 1974/D 1974M-16; CID A-A-1684C; FDA Indirect Contact CFR 21, 175.105; FDA Indirect Contact CFR 21, 177.1520. Carrier/Backing: 30 micron biaxially oriented polypropylene (BOPP) film. Adhesive: synthetic rubber-resin.
• Thickness: 1.9 mils (carrier, adhesive). Adhesion: 44 ounces per inch (to stainless steel test panel). Adhesion to Backing: 4 ounces per inch. Tensile Strength: 27 pounds per inch (longitudinal) 44 pounds per inch (transverse). Service/Operating Temperature: -20F to 150F. Application Temperature: 35F to 110F. Elongation: 150%. Holding Power to Fiberboard: 15,000+ minutes. Core: 3-inch diameter.