Intertape PG21 High Temperature Masking Tape is an extremely versatile masking tape which is resistant to strong solvents and paints and is easily removed in warm or cold environments. It is designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325F (163C) for 30 minutes (time and temperature determined by surface). IPG PG21 performs well in wet strip applications and its easy handling, smooth paper crepe backing exhibits high strength, excellent conformability to irregular surfaces and exceptional cornering. It provides resistance to paint flaking as well as a clean, well-defined paint line. Applications uses include automotive, truck, bus, and marine paint masking. Recommended hot to warm removal, but can be removed cold. Made in the U.S.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 48mm x 55m. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information
– Core: 3 inch diameter
– Backing/Carrier: crepe paper
– Adhesive: rubber/resin
– Standards Met: ASTM D6123/D6123M (1), CID AA-883B (1), BAC5317
– Thickness: 7.3 mils (carrier, adhesive)
– Adhesion: 28 ounces per inch (to stainless steel test panel)
– Tensile Strength: 26 pounds per inch (longitudinal)
– Service/Operating Temperature: up to 325F
– Elongation: 10 %
- Intertape PG21 High Temperature Masking Tape is an extremely versatile masking tape which is resistant to strong solvents and paints and is easily removed in warm or cold environments.
- It is designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325F (163C) for 30 minutes (time and temperature determined by surface).
- IPG PG21 performs well in wet strip applications and its easy handling, smooth paper crepe backing exhibits high strength, excellent conformability to irregular surfaces and exceptional cornering.
- The tape provides resistance to paint flaking as well as a clean, well-defined paint line. Applications uses include automotive, truck, bus, and marine paint masking. Recommended hot to warm removal, but can be removed cold.
- Carrier/Backing: crepe paper. Adhesive: rubber/resin. Thickness: 7.3 mils (carrier, adhesive). Adhesion: 28 ounces per inch (to stainless steel test panel). Tensile Strength: 26 pounds per inch (longitudinal). Service/Operating Temperature: up to 325F. Elongation: 10%. Standards Met: ASTM D6123/D6123M (1), CID AA-883B (1), BAC5317. Core: 3-inch diameter.
Reviews
There are no reviews yet.