JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper coated with a natural/synthetic rubber blend adhesive system. Good for carton sealing applications, moderate demand splicing applications, tabbing and/or core starting. Complies with Postal Regulation for Uninsured Packages. May be used in picture framing applications to seal back of frame/artwork due to its ability to stick to its own backing. This tape is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape. The tape is hand-tearable and is not repulpable.
This tape has a more matte (less shiny) surface than Shurtape FP-96 Kraft paper tape. Also please note that since this is a very soft tape you will oftentimes see gapping and pressure points along the side of the rolls once it is cut to width; however, this will not affect the performance of the tape. Made in the U.S.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 12mm x 55m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information
– Core: 3 inch diameter
– Backing/Carrier: flatback paper
– Adhesive: natural/synthetic rubber blend
– Standards Met: PPP-T-42C, Type II; CID A-A-883B, Type II
– Thickness: 7.3 mils (carrier, adhesive)
– Adhesion: 58 ounces per inch (to stainless steel test panel)
– Tensile Strength: 46 pounds per inch (longitudinal)
– Service/Operating Temperature: 40F to 175F
– Elongation: 7 %
- JVCC FPPT-01 Kraft Flatback Paper Packaging Tape is a brown color kraft flatback paper coated with a natural/synthetic rubber blend adhesive system.
- This tape is a good choice for carton sealing applications, moderate demand splicing applications, tabbing and/or core starting. May be used in picture framing applications to seal back of frame/artwork due to its ability to stick to its own backing.
- JVCC FPPT-01 is a pressure-sensitive adhesive tape and does not need water to activate it like a gummed paper tape. The tape is hand-tearable and is not repulpable.
- This tape has a more matte (less shiny) surface than Shurtape FP-96 Kraft Paper tape. Complies with Postal Regulation for Uninsured Packages. Standards Met: PPP-T-42C, Type II; CID A-A-883B, Type II.
- Carrier/Backing: flatback paper. Adhesive: natural/synthetic rubber blend. Thickness: 7.3 mils (carrier, adhesive). Adhesion: 58 ounces per inch (to stainless steel test panel). Tensile Strength: 46 pounds per inch (longitudinal). Service/Operating Temperature: 40F to 175F. Elongation: 7%. Core: 3-inch diameter.
Reviews
There are no reviews yet.