JVCC GLW-24 Professional Glow in the Dark Tape: 1/2 in x 30 ft. (Luminescent Lime Green)

JVCC GLW-24 Professional Glow in the Dark Tape is a flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness, the tape is immediately visible. The tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). It is wound on a liner for easy handling. Also used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims, and special effects. Used in hotels, hospitals, schools, public facilities, office buildings and manufacturing plants.

JVCC GLW-24 Professional Glow Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased. It initially glows approximately twice as bright as the JVCC GLW 6-hour product. The tape will remain visible in a totally dark room to the night-adjusted eye for up to 24 hours. Allow approximately 1-2 minutes for your eyes to adjust to the darkness (night-adjusted eye). Although this tape has a highly visible glow, it would not compare in brightness to a standard flashlight.

JVCC GLW-24 tape is rechargeable. In its uncharged state the tape has a white/cream color and when glowing the tape has a luminescent lime green color. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. This ultra-premium tape is offset, screen, flexo, and thermo transfer printable. The adhesive has a 24 hour dwell time. Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 12.5mm wide. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
– Core: 3 inch diameter neutral
– Backing/Carrier: laminated photoluminescent polyester film
– Adhesive: solvent-based acrylic
– Release Liner: poly-coated paper
– Thickness: 20 mils (carrier, adhesive, liner) 15 mils (carrier, adhesive) 5 mils (liner)
– Adhesion: 72 ounces per inch (to stainless steel test panel)
– Tensile Strength: 30 pounds per inch (longitudinal)
– Application Temperature: 50F (minimum)

• JVCC GLW-24 Professional Glow in the Dark Tape is a flexible polyester laminated photoluminescent film tape with a permanent adhesive on one side. The photoluminescent pigments absorb and store energy from normal, ambient light. In sudden darkness the tape is immediately visible.
• JVCC GLW-24 tape provides a non-electric safety marking system that easily and inexpensively affixes to walls, handrails, columns, around door frames, and along stairways and baseboards (provides visibility during an emergency). This tape is used for identification of critical equipment controls, exit and directional signage (especially for escape routes and stairways), light switch covers, labels, decals, novelties, sporting goods, trims, and special effects.
• JVCC GLW-24 tape is rechargeable. In its uncharged state the tape has a white/cream color and when glowing the tape has a luminescent lime green color. The tape has excellent UV stability and does not show significant degradation when used outdoors. The luminescent system used is non-radioactive and non-toxic. This ultra-premium tape is offset, screen, flexo, and thermo transfer printable. The adhesive has a 24 hour dwell time.
• Carrier/Backing: laminated photoluminescent polyester film; Adhesive: solvent-based acrylic; Application Temperature: 50F (minimum); Thickness: 20 mils (carrier, adhesive, liner) 15 mils (carrier, adhesive) 5 mils (liner); Adhesion: 72 ounces/inch (to stainless steel test panel); Tensile Strength: 30 pounds/inch (longitudinal); Release Liner: poly-coated paper; Core: 3 inch diameter neutral. It is wound on a liner for easy handling.
• JVCC GLW-24 Professional Glow Tape is fully charged within 30 minutes after exposure to either artificial or natural light and glows brightest the first 15 to 30 minutes after activation has ceased. It initially glows approximately twice as bright as the JVCC GLW 6-hour product. The tape will remain visible in a totally dark room to the night-adjusted eye for up to 24 hours. Allow approximately 1-2 minutes for your eyes to adjust to the darkness (night-adjusted eye).