Oukaning Dimmable Light Bar LED Night Light USB Rechargeable

This product is a motion detection sensor light

(1) Short press the mode button to switch (the induction mode light is on for 2 seconds, and automatically turns off – always on mode – off, three modes cycle)

(2) Short press the color temperature key to switch the light color temperature (white light – natural light – warm white light, three color temperature cycles),

(3) Press and hold the color temperature key to adjust the brightness of the light. In smart sensing mode, when the ambient light is low, if the probe detects the movement of a person, the LED will light up. After the human body leaves the sensing range of the probe, the LED will turn off after a delay of 10 seconds.

About this project

Micro-USB charging port

Light sensor

PIR sensor

Mode

Color temperature

LED lighting area

Bonding iron sheet

Installation Notes

When using magnetic suction, you need to tear off the double-sided adhesive protective paper on the surface of the self-adhesive iron sheet.

Then fix the adhesive-backed iron sheet on the target surface, and finally adsorb the light bar on the adhesive-backed iron sheet;

Precautions

1. Do not install this product in a humid, high temperature or large temperature change environment, which may affect the normal operation of this product.

2. When the walking path of the human body is exactly the same as the detection direction of the probe, the sensing distance may be reduced.

3. During use, when the brightness of the light is obviously dimmed, please charge the product.

• Color temperature: with white light – natural light – warm white light, three color temperature cycles, the perfect design for any ideal use
• How to set the light correctly: short press the color temperature key to switch the light color temperature (white light – natural light – warm white light, three color temperature cycles), long press the color temperature key to adjust the brightness of the light
• Micro-USB charging port: In smart sensing mode, when the ambient light is weak, if the probe detects human movement, the LED will light up. After the human body leaves the sensing range of the probe, the LED will turn off after a delay of 10 seconds
• Light induction: short press the mode button to switch (the induction mode light is on for 2 seconds, the normal off mode is automatically turned off, and the three-mode cycle is fully charged), the LED cabinet light can be used continuously for about 5 hours, and there is no need to worry about frequent replacement of AAA batteries