Shurtape PC-600 General Purpose Grade Duct Tape: 2 in x 60 yds. (Yellow)

Shurtape PC-600 General Purpose Grade Duct Tape is a general purpose duct tape that can be used in a wide range of applications and environments.This tape is versatile, simple to use and will not twist or curl during application. Applications for Shurtape PC 600 Duct Tape include, industrial, carpet, plumbing, HVAC, sealing, waterproofing, patching, and asbestos abatement. Product features for Shurtape PC-600 include a non-glare and waterproof backing, easily fits around shapes and surfaces, and good handling characteristics. PC 600 SIL refers to the silver color of this tape and PC 600 CLR refers to the other 12 stock colors which are black, brown, red, yellow, olive drab, white, orange, green, blue, burgundy, purple and beige (tan). Please note Shurtape’s version of olive drab is very dark as displayed in the product photo.

PC 600 silver comes with Shurtape’s Polyblended CO-EX technology which is a co-extrusion process which melds polyethylene, cloth and adhesive in a single, high-temperature step which results in a permanent, airtight bond (creates added strength which will not delaminate). Made in the U.S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product’s actual size is 48mm x 55m. As with any adhesive tape product it is always the user’s responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. In the photo the colors are the following (starting from the leftmost column and working down): Red, White, Yellow, Orange, Silver, Black, Olive Drab, Burgundy, Floral Green, Blue, Tan, Brown, Purple, Green.

Technical Information
– Core: 3 inch diameter
– Backing/Carrier: polyethylene film with a polyester/cotton blend cloth carrier
– Adhesive: natural rubber
– Thickness: 9 mils (carrier, adhesive)
– Adhesion: 50 ounces per inch (to stainless steel test panel)
– Tensile Strength: 22 pounds per inch (longitudinal)
– Service/Operating Temperature: 50F to 200F
– Elongation: 16 %

• Shurtape PC-600 General Purpose Grade Duct Tape is a general purpose duct tape that can be used in a wide range of applications and environments.This tape is versatile, simple to use and will not twist or curl during application. Applications for Shurtape PC 600 Duct Tape include, industrial, carpet, plumbing, HVAC, sealing, waterproofing, patching, and asbestos abatement.
• Product features for Shurtape PC-600 include a non-glare and waterproof backing, hand-tearable, does not twist and turn during application, easily fits around shapes and surfaces, and good handling characteristics. PC 600 silver comes with Shurtape’s Polyblended CO-EX technology which is a co-extrusion process which melds polyethylene, cloth and adhesive in a single, high-temperature step which results in a permanent, airtight bond. Made in the USA.
• Tape rolls are typically cut to standard tape industry metric-cut sizes – or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).
• Adhesive: natural rubber. Carrier/Backing: polyethylene film with a polyester/cotton blend cloth carrier. Thickness: 9 mils (carrier, adhesive). Adhesion: 50 ounces per inch (to stainless steel test panel)
• Tensile Strength: 22 pounds per inch (longitudinal). Service/Operating Temperature: 50°F to 200°F. Elongation: 16%. Core: 3" diameter