High Torque Serial Bus Servo Full Metal Gear Dual Shaft with Bus Servo Controller, TTL Tester Board for RC Robot (5packs)

Product Description :

Parameter (LX-15D bus servo):Voltage: 6-8.
4VSpeed: 0.
23sec/60°@7.
4VTorque: 15kg.
cm @6V; 1 7  kg.
cm @7.
4VRotation: 0~240°No-load current：100mAStall current: 2.
4~3AServo accuracy: 0.
3°Control range: 0~1000 correspond to 0°~240°Control method: UART serial commandCommunication baud rate: 115200Servo ID: 0~253,user configurable,default ID 1Angle read back function: supportData feedback: temperature; voltage; position Save setting: save data when the power offWire: 20cmConnector: PH2.
0-3PFeature:LX-15D Bus Servo:-Torque: 15 kg/cm (208 oz/in) 6V; 17 kg/cm (236 oz/in) 7.
4V- Metal Gear: Adopts all-metal geard inside, strong, durable and long service time-Variable ID: The default number is 1 which is modifiable.
And it can be controlled by serial port commands, connected to multiple servos at the same time-Details Tutorial: Provide bus servo communication protocol, 51 Arduino and STM32 source codeTTL Tester Board: -TTL / USB tester  board is a servo debugger, which is able to connect the servo to the PC software or other devices and use them to adjust the parameter of servos.
Bus Servo Controller:-Bus servo controller can be used in serial servo control and it can combine with PS2 wireless handle to realize servo remote control.
 -It supports manual programming, online debugging and TTL serial port communication.
 -If you are using serial bus servo of 11.
1V, like LX-224HV, 824HV, etc, please use 11.
1V lithium battery to powPackage List:5* LX-15D serial bus servo10* servo horn1* screws bags5* 20cm(7.
87inch) servo wire

Product Details :